• SKU: 0K-0276-901
    The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: EC-A236-525
    Optical Sensor Switch for Optical Encoder Disc.
    $24.11
    Add to compare
  • SKU: 0K-2236-902
    Optical Disc/Gear Assembly includes the motor pulley and optical disc.
    $77.34
    Add to compare
  • SKU: EB-3236-500
    The Digital Timer Board is used on the 120V, 230V and 100V Digital MegaMag Genie magnetic stirrer, and can be easily installed. Attaches with four mounting screws from inside of the unit.
    $124.32
    Add to compare
  • SKU: 0K-4236-903
    The 120V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-4246-903
    The 230V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-4286-903
    The 100V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-3236-903
    The 120V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wire
    $142.45
    Add to compare
  • SKU: 0K-3246-903
    The 230V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-3286-903
    The 100V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: EL-3L36-575
    The Digital Keypad is used on the 120V, 230V and 100V Digital MegaMag Genie LR magnetic stirrer. Thread the cable through the slot in housing. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable.
    $51.65
    Add to compare
  • SKU: 0K-3L36-901
    Magnet assembly includes magnets, plate and pulley.
    $161.76
    Add to compare
  • SKU: EB-3236L-500
    The Digital Timer Board is used on the 120V, 230V and 100V Digital MegaMag Genie LR magnetic stirrer, and can be easily installed. Attaches with four mounting screws from inside of the unit.
    $124.32
    Add to compare
  • SKU: 0K-3L36-902
    Optical Disc/Gear Assembly includes the motor pulley and optical disc.
    $77.34
    Add to compare
  • SKU: 0K-3L36-903
    The 120V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-3L46-903
    The 230V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare
  • SKU: 0K-2236-901
    Magnet assembly includes magnets, plate and pulley.
    $172.59
    Add to compare
  • SKU: 0M-0236-209
    The Push-on Knob can be easily installed by pulling off the old knob and pushing on the new knob.
    $24.11
    Add to compare
  • SKU: 318-0510-02
    The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: 0K-0246-901
    The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: 0K-0256-901
    The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: 0K-0266-901
    The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: 0K-0286-901
    The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $24.11
    Add to compare
  • SKU: ECP0021
    This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.
    $24.11
    Add to compare
  • SKU: EPP0005
    This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.
    $55.11
    Add to compare
  • SKU: EB-0246-500
    This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.
    $55.11
    Add to compare
  • SKU: HWP0004
    Four adhesive mounted feet.
    $13.77
    Add to compare
  • SKU: PP-2236-400
    This kit contains both the top and bottom housing covers.
    $125.50
    Add to compare
  • SKU: HWP0058
    This is the belt between the motor pulley and the magnet pulley.
    $8.60
    Add to compare
  • SKU: EL-2236-575
    The Digital Keypad is used on the 120V, 230V and 100V Digital MegaMag Genie magnetic stirrer. Thread the cable through the slot in housing. Peel and Stick Adhesive back adheres keypad easily to casting. Then connect the ribbon cable.
    $55.11
    Add to compare
  • SKU: 0K-2236-900
    The Analog Nameplate has a peel and stick adhesive back, which adheres easily to the housing.
    $12.16
    Add to compare
  • SKU: ESP0001
    This is the Power Switch that illuminates red for the 100V and 120V models.
    $32.72
    Add to compare
  • SKU: ESP0002
    This is the Power Switch that illuminates green for the 230V and 240V models.
    $32.72
    Add to compare
  • SKU: 0K-3L86-903
    The 100V Motor Assembly for the Digital MegaMag Genie LR magnetic stirrer, can be easily installed using a 1/4" nut driver and then re-attaching the wires.
    $142.45
    Add to compare