Contact Us

SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-2236-902
Optical Disc/Gear Assembly includes the motor pulley and optical disc.

SKU: 0K-4236-903
The 120V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-4246-903
The 230V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-4286-903
The 100V Motor Assembly for the Analog MegaMag Genie and Analog QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-3236-903
The 120V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wire

SKU: 0K-3246-903
The 230V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-3286-903
The 100V Motor Assembly for the Digital MegaMag Genie and Digital QuadMag Genie magnetic stirrers, can be easily installed using a 1/4" nut driver and then re-attaching the wires.

SKU: 0K-4236-904
This is the tensioner assembly for the QuadMag Genie. Includes torsion spring, screw, washer and tensioner block.

SKU: 0K-4236-900
The Analog Nameplate has a peel and stick adhesive back, which adheres easily to the housing.

SKU: 0M-2236-207
Silicone Mat prevents containers from vibrating off the unit at high speeds.

SKU: 0K-4236-901
Magnet assembly includes magnets, plate and pulley. This kit contains (1) assembly. The QuadMag uses (4) assemblies total.

SKU: EC-A236-525
Optical Sensor Switch for Optical Encoder Disc.

SKU: 0M-0236-209
The Push-on Knob can be easily installed by pulling off the old knob and pushing on the new knob.

SKU: ESP0002
This is the Power Switch that illuminates green for the 230V and 240V models.

SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.

SKU: ECP0021
This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.

SKU: EPP0005
This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.

SKU: EB-0246-500
This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.

SKU: HWP0004
Four adhesive mounted feet.