We've supplied pictures of each part to help you find your needed replacement part. Click on the part numbers for more information. If you have any questions, please contact our customer service department for further assistance. Toll Free: 888-850-6208 • Email: custsvc@scientificindustries.com
  • SKU: 0K-0276-901
    The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: ESP0005
    The Micro Switch can be easily installed using a philips head screw driver. Please note, this micro switch has two tabs. If your micro switch has three tabs you will need to order Part No. ESP0003.
    $27.37
    Add to compare
  • SKU: 0K-0236-904
    This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, and Eccentric Clamp. This assembly is used on the Motor Assembly.
    $93.70
    Add to compare
  • SKU: 0K-0236-905
    The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 0K-0246-915
    The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 0K-0286-915
    The 100V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 566-0028-00
    The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.
    $15.65
    Add to compare
  • SKU: ESP0008
    This kit contains a toggle switch that can be easily installed. For use on the Vortex-Genie 2T Timer Genie Models ONLY. Please note, although the switches look the same this switch can not be used on the Vortex-Genie 2 mixer.
    $27.37
    Add to compare
  • SKU: EBP0001
    The Timer Board Kit is used on the 120V, 230V and 100V Vortex-Genie 2T Mixers. This kit contains the Timer Board and Toggle Switch.
    $141.17
    Add to compare
  • SKU: ECP0021
    This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.
    $24.83
    Add to compare
  • SKU: 0K-0286-901
    The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0236-408
    Bottom Closure with Feet Kit
    $45.49
    Add to compare
  • SKU: 0K-0500-901
    3-inch Platform without Rubber Cover
    $31.49
    Add to compare
  • SKU: 146-3011-00
    Pop-off Cup
    $31.49
    Add to compare
  • SKU: 580-2013-00
    Rubber Cover for 3-inch Platform
    $31.49
    Add to compare
  • SKU: 318-0510-02
    The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0246-901
    The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0256-901
    The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0266-901
    The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: PP-T236-400
    The Timer Knob Set includes a small grey timer knob and a black speed control knob, which can be easily installed. Gently pull off the old gray knob. A hex wrench (Allen key) is needed to remove the black speed control knob.
    $27.37
    Add to compare