Motor 100V Assembly
SKU: 0K-0286-915The 100V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
$161.75
Motor 120V Assembly
SKU: 0K-0236-905The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
$161.75
Motor 230V Assembly
SKU: 0K-0246-915The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
$161.75
Rheostat, 100V
SKU: 0A-0286-050This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
$62.58
Rheostat, 120V
SKU: 0A-0236-050This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
$62.58
Rheostat, 120V
SKU: 0A-0236-051This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EPP0005.
$62.58
Rheostat, 230V
SKU: 0A-0246-050This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
$62.58
Speed Control 100V
SKU: EB-0286-500This 100V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0286-051.
$62.58
Speed Control 120V
SKU: EPP0005This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.
$62.58
Speed Control 230V
SKU: EB-0246-500This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.
$62.58
Spring, Extension, Eccentric
SKU: 566-0028-00The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.
$15.65
Switch, On/Off/On
SKU: ESP0004This kit contains a toggle switch that can be easily installed. Please note, although the switches look the same this switch can not be used on the Vortex-Genie Pulse mixer.
$27.37
Need Help?