• Cannot remove the item.
In the course of the past 25 years some parts have changed as they've become unavailable. We've supplied pictures of each part to help you find your needed replacement part. Click on the part numbers for more information. If you have any questions, please contact our customer service department for further assistance. Toll Free: 888-850-6208 • Email: custsvc@scientificindustries.com
  • SKU: 0K-0276-901
    The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0A-0236-051
    This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EPP0005.
    $62.58
    Add to compare
  • SKU: EB-0246-500
    This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.
    $62.58
    Add to compare
  • SKU: 0A-0246-050
    This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
    $62.58
    Add to compare
  • SKU: EB-0286-500
    This 100V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0286-051.
    $62.58
    Add to compare
  • SKU: 0A-0286-050
    This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
    $62.58
    Add to compare
  • SKU: 0A-0286-051
    This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EB-0286-500.
    $62.58
    Add to compare
  • SKU: 0K-0236-904
    This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, and Eccentric Clamp. This assembly is used on the Motor Assembly.
    $93.70
    Add to compare
  • SKU: 0K-0236-905
    The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 0K-0246-915
    The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 0K-0286-915
    The 100V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
    $161.75
    Add to compare
  • SKU: 566-0028-00
    The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.
    $15.65
    Add to compare
  • SKU: KBP0001
    This Speed Control Knob was used in Vortex-Genie 2 mixers that were produced prior to the year 2000. It contains a set screw for attaching to the Rheostats and has a silver cap. This knob is used on the 120V, 230V and 100V Rheostats only.
    $27.37
    Add to compare
  • SKU: 0A-0236-050
    This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
    $62.58
    Add to compare
  • SKU: EPP0005
    This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.
    $62.58
    Add to compare
  • SKU: 0K-0236-408
    Bottom Closure with Feet Kit
    $45.49
    Add to compare
  • SKU: 0K-0500-901
    3-inch Platform without Rubber Cover
    $31.49
    Add to compare
  • SKU: 146-3011-00
    Pop-off Cup
    $31.49
    Add to compare
  • SKU: 580-2013-00
    Rubber Cover for 3-inch Platform
    $31.49
    Add to compare
  • SKU: 318-0510-02
    The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0246-901
    The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0256-901
    The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0266-901
    The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: 0K-0286-901
    The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.
    $27.37
    Add to compare
  • SKU: ECP0021
    This kit contains the Australian Plug only, which can be easily installed on the 230V No Plug Line Cord.
    $24.83
    Add to compare
  • SKU: ESP0004
    This kit contains a toggle switch that can be easily installed. Please note, although the switches look the same this switch can not be used on the Vortex-Genie Pulse mixer.
    $27.37
    Add to compare
  • SKU: ESP0003
    The Micro Switch can be easily installed using a philips head screw driver. This Micro Switch was used in the Vortex-Genie 2 mixers that were produced before the year 1998. If your Vortex-Genie 2 mixer has a brass thumb screw sticking out of the bottom of the unit, then you will use this Micro Switch. Please note, this switch has three tabs. If your Micro Switch has two tabs you will need to order Part No. ESP0005.
    $27.37
    Add to compare
  • SKU: 0M-0236-209
    The Push-on Knob can be easily installed by pulling off the old knob and pushing on the new knob.
    $27.37
    Add to compare