In the course of the past 25 years some parts have changed as they've become unavailable. We've supplied pictures of each part to help you find your needed replacement part. Click on the part numbers for more information. If you have any questions, please contact our customer service department for further assistance. Toll Free: 888-850-6208 • Email: custsvc@scientificindustries.com
- SKU: 0K-0276-901
The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37 - SKU: 0A-0236-051
This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EPP0005.$62.58 - SKU: EB-0246-500
This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.$62.58 - SKU: 0A-0246-050
This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.$62.58 - SKU: EB-0286-500
This 100V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0286-051.$62.58 - SKU: 0A-0286-050
This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.$62.58 - SKU: 0A-0286-051
This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EB-0286-500.$62.58 - SKU: 0K-0236-904
This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, and Eccentric Clamp. This assembly is used on the Motor Assembly.$93.70 - SKU: 0K-0236-905
The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.$161.75 - SKU: 0K-0246-915
The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.$161.75 - SKU: 0K-0286-915
The 100V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.$161.75 - SKU: 566-0028-00
The Spring, Extension, Eccentric can be easily attached from the Eccentric Clamp to the Bottom of the Motor Mounting Plate.$15.65 - SKU: KBP0001
This Speed Control Knob was used in Vortex-Genie 2 mixers that were produced prior to the year 2000. It contains a set screw for attaching to the Rheostats and has a silver cap. This knob is used on the 120V, 230V and 100V Rheostats only.$27.37 - SKU: 0A-0236-050
This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.$62.58 - SKU: EPP0005
This 120V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0236-051.$62.58 - SKU: 0K-0236-408
Bottom Closure with Feet Kit$45.49 - SKU: 0K-0500-901
3-inch Platform without Rubber Cover$31.49 - SKU: 146-3011-00
Pop-off Cup$31.49 - SKU: 580-2013-00
Rubber Cover for 3-inch Platform$31.49 - SKU: 318-0510-02
The 120V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37 - SKU: 0K-0246-901
The 230V Line Cord, No Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37 - SKU: 0K-0256-901
The 230V Line Cord, Euro Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37 - SKU: 0K-0266-901
The 230V Line Cord, British Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37 - SKU: 0K-0286-901
The 100V Line Cord kit includes a strain relief. The Line Cord can be easily installed using pliers.$27.37